Make It Merry Crochet Christmas Tree Pattern

There is something wonderfully cozy about decorating for Christmas with pieces you have made yourself.
A handmade ornament can make a Christmas tree feel more personal, but a full crocheted tabletop Christmas tree takes that feeling to another level. It becomes a decoration you can bring out every December, place on the dining table for Christmas dinner, display on an entryway console, or use to add a little handmade holiday charm to your desk or workspace.
The Make It Merry Crochet Tree is exactly that kind of project.
Designed by Michele Wilcox, this beautiful centerpiece combines two shades of green with a sparkling white crochet star. The finished tree measures approximately 13 inches tall, not including the star, making it substantial enough to become a focal point without taking over your table. RHC0518-015435M
What makes the design especially interesting is its construction.
Underneath all those layered crochet leaves is a simple foam cone covered with a fitted crocheted sleeve. Dozens of individual leaves are then crocheted in several sizes and sewn around the cover in overlapping rows.
The largest leaves sit near the bottom.
Medium leaves transition toward the upper section.
Small and extra-small leaves finish the top.
Alternating light and dark green creates the rich layered appearance shown in the photograph on page 1, while two white metallic stars are crocheted, sewn together, and attached to the top.
Despite how elaborate the finished tree looks, the original pattern is rated Easy. RHC0518-015435M
This expanded guide keeps the original construction and stitch counts while explaining how all those pieces come together.
About the Make It Merry Crochet Tree

The original pattern describes this as a contemporary tree that can be used on a holiday table or as a handmade decoration elsewhere in the home or workplace. RHC0518-015435M
The project has four main components:
1. Centerpiece Cover – A fitted green crochet cone that slips over the foam base.
2. Leaves – Large, medium, small, and smallest leaves are crocheted separately.
3. Star – Two metallic white stars are crocheted and sewn together.
4. Assembly – The leaves are sewn onto specific rounds of the cone cover from bottom to top.
This layered construction is what gives the finished tree its full, dimensional appearance.
Pattern at a Glance
Project: Make It Merry Crochet Tree
Designer: Michele Wilcox
Skill Level: Easy
Finished Height: 13″ / 33 cm, excluding star
Main Yarn: Red Heart With Love
Star Yarn: Red Heart With Love Metallic
Hook: 4 mm / U.S. G-6
Base: 12-inch-tall foam cone
Main Techniques: Single crochet, half double crochet, double crochet, back-loop crochet and basic sewing
Construction: Crochet cone cover + individually sewn leaves + two-layer star
Materials You’ll Need

The original tree uses two shades of green and one metallic white yarn.
You will need:
Color A – Red Heart With Love, 1601 Lettuce: 1 skein
Color B – Red Heart With Love, 1621 Evergreen: 1 skein
Red Heart With Love Metallic, 8010 White: 1 ball
You’ll also need:
- 4 mm / U.S. G-6 crochet hook
- Foam cone measuring 4″ / 10 cm across the base × 12″ / 30.5 cm tall
- 4″ / 10 cm square of white peel-and-stick felt
- Yarn needle
- Scissors
These are the materials specified in the source. RHC0518-015435M
Crochet Gauge
The required gauge is:
16 dc = 4″ / 10 cm
and
12 rows = 5″ / 13 cm
in double crochet.
The source instructs you to change hook size if necessary to obtain gauge. RHC0518-015435M
Gauge matters here because the centerpiece cover needs to fit over the foam cone.
If your cover is dramatically too small, it won’t slip over the cone. If it’s too loose, the leaves may not sit as neatly against the structure.
Crochet Abbreviations
A – Color A, Lettuce
B – Color B, Evergreen
Ch – Chain
Dc – Double crochet
Hdc – Half double crochet
Sc – Single crochet
St/Sts – Stitch/Stitches
Slip st – Slip stitch
Brackets indicate that the enclosed instructions should be repeated the specified number of times. RHC0518-015435M
Important Construction Notes
Before beginning, there are several details worth understanding.
The Centerpiece Cover is worked in joined rounds with the right side facing throughout.
Its stitches are worked:
in the back loops only.
The leaves, however, are made separately.
Once the cover is placed over the foam cone, the leaves are sewn onto it in layers.
The source specifically instructs you to place:
larger leaves toward the bottom
and
smaller leaves toward the top. RHC0518-015435M
That gradual change in leaf size is what creates the natural tapered Christmas-tree silhouette.
How to Crochet the Centerpiece Cover
Begin at the top of the tree using:
Color A – Lettuce.
Chain:
4.
Cover Round 1
Work:
11 dc into the fourth chain from your hook.
The three skipped chains count as one double crochet.
Join with a slip stitch into the top of that beginning chain 3.
You should have:
12 dc.
Round 2
Chain 1.
From this point, remember that the cover stitches are worked through:
back loops only.
Sc in the same double crochet as the joining stitch.
Sc in every remaining double crochet around.
Join with a slip stitch into the first sc.
You should have:
12 sc.
Round 3
Chain 3.
This counts as a double crochet here and throughout the cover.
Working through back loops only:
Dc in each sc around.
Join to the top of the beginning chain 3.
You still have:
12 dc.
Round 4 – First Increase
Chain 1.
Working in back loops only:
Sc in the same dc as joining.
Work:
2 sc in next dc.
Then repeat:
Sc in next dc, 2 sc in next dc
5 times.
Join.
You should now have:
18 sc.
Round 5
Chain 3.
Working through back loops only:
Dc in each sc around.
Join.
You have:
18 dc.
Round 6 – Increase Again
Chain 1.
Working through back loops only:
Sc in the same dc.
Sc in the next dc.
Work:
2 sc in next dc.
Then repeat:
Sc in next 2 dc, 2 sc in next dc
5 times.
Join.
You should have:
24 sc.
Round 7
Chain 3.
Working through back loops only:
Dc in every sc around.
Join.
Round 8 – Continue Shaping the Cone
Chain 1.
Working in back loops only:
Sc in the same dc.
Sc in the next:
2 dc
Then:
2 sc in next dc.
Repeat:
Sc in next 3 dc, 2 sc in next dc
5 times.
Join.
You should now have:
30 sc.
The progressive increases through these early rounds create the tapered cone shape required to fit over the foam base. RHC0518-015435M
Cover Rounds 9–13
Round 9
Chain 3.
Working in back loops only:
Dc in each sc around.
Join.
Round 10
Chain 1.
Working in back loops only:
Sc in every dc around.
Join.
Round 11
Chain 3.
Working in back loops only:
Dc in every sc around.
Join.
Rounds 12–13
Repeat:
Rounds 10 and 11.
This gives you alternating rounds of single crochet and double crochet without adding more stitches yet. RHC0518-015435M
Round 14 – Final Major Increase
Chain 1.
Working through back loops only:
Sc in the same dc as joining.
Sc in the next:
3 dc.
Work:
2 sc in next dc.
Then repeat:
Sc in next 4 dc, 2 sc in next dc
5 times.
Join with a slip stitch into the first sc.
You should have:
36 sc.
Round 15
Chain 3.
Working in back loops only:
Dc in every sc around.
Join.
Rounds 16–25
Repeat:
Rounds 10 and 11
until you have completed Round 25.
Fasten off. RHC0518-015435M
Your tree cover is now finished.
Fit the Crochet Cover Over the Foam Cone
Carefully slip the completed cover over your foam cone.
Keep the rows:
straight.
Then set the covered cone aside while you crochet all the individual leaves. RHC0518-015435M
At this stage, the project will look much simpler than the finished tree on page 1.
That’s normal.
All of the fullness comes from the many layered leaves added next.
How Many Crochet Leaves Do You Need?
This tree uses a lot of leaves.
According to the source, you’ll make:
Large Leaves: 28 with Color A + 21 with Color B
Medium Leaves: 7 with Color A + 7 with Color B
Small Leaves: 7 with Color A
Smallest Leaves: 7 with Color A
One important issue appears in the source: the finishing instructions later refer to 7 B Small Leaves around Round 4, even though the Small Leaves heading says to make 7 with A. Rather than silently changing the source, check this discrepancy before cutting yarn or assembly. RHC0518-015435M RHC0518-015435M
How to Crochet the Large Leaves
Make:
28 with Color A
and
21 with Color B.
Chain:
12.
Large Leaf Row 1
Beginning in the second chain from your hook:
Sc in that chain.
Hdc in the next chain.
Dc in the next:
8 chains.
In the final chain work:
6 dc.
Now rotate your work so you can crochet along the opposite edge of the foundation chain.
Dc in the next:
8 chains.
Hdc in the next chain.
Sc in the final chain.
You should have:
26 stitches.
This technique creates the elongated rounded leaf shape without requiring you to crochet two separate halves.
Large Leaf Row 2
Chain 1.
Turn.
Sc in the first sc.
Hdc in the next:
10 stitches.
Work:
2 hdc in each of the next 4 stitches.
Then:
Hdc in next 10 stitches.
Sc in the final stitch.
Fasten off.
Most importantly:
leave a long yarn tail for sewing. RHC0518-015435M
You will need those tails when attaching dozens of leaves to the cone.
How to Crochet the Medium Leaves
Make:
7 with Color A
and
7 with Color B.
Chain:
9.
Medium Leaf Row 1
Sc in the second chain from your hook.
Hdc in the next chain.
Dc in the next:
5 chains.
Work:
6 dc in the final chain.
Turn to crochet along the opposite edge of the foundation chain.
Dc in the next:
5 chains.
Hdc in the next chain.
Sc in the final chain.
You should have:
20 stitches.
Medium Leaf Row 2
Chain 1.
Turn.
Sc in the next:
8 stitches.
Then:
2 sc in each of the next 4 stitches.
Sc in the final:
8 stitches.
Fasten off, leaving a long tail for sewing. RHC0518-015435M
How to Crochet the Small Leaves
The source’s Small Leaves section says:
make 7 with Color A.
Chain:
6.
Small Leaf Row 1
Sc in the second chain from your hook.
Hdc in the next:
3 chains.
Work:
6 hdc in the final chain.
Turn so you can crochet along the opposite side of the foundation chain.
Hdc in the next:
3 chains.
Sc in the final chain.
You should have:
14 stitches.
Small Leaf Row 2
Chain 1.
Turn.
Sc in the next:
5 stitches.
Work:
2 sc in each of the next 4 stitches.
Then:
Sc in next 5 stitches.
Fasten off, leaving a long sewing tail. RHC0518-015435M
How to Crochet the Smallest Leaves
Make:
7 with Color A.
Chain:
6.
Smallest Leaf Row 1
Sc in the second chain from your hook.
Hdc in the next:
3 chains.
In the final chain work:
5 hdc.
Turn to work along the opposite edge of the foundation chain.
Hdc in the next:
3 chains.
Sc in the final chain.
You should have:
13 stitches.
Unlike the other leaves, there is no second row.
Fasten off and leave:
a long tail for sewing. RHC0518-015435M
How to Crochet the Christmas Tree Star
The sparkling topper is made from:
two identical stars
using the White Metallic yarn.
Make:
2.
Chain:
2.
Star Round 1
Work:
5 sc in the second chain from your hook.
You should have:
5 sc.
Star Round 2
Unlike the cone cover, the star is worked in:
continuous rounds.
Work:
2 sc in every sc around.
You should now have:
10 sc.
Star Round 3
Repeat the following sequence:
Slip stitch in next sc.
Chain 4.
Sc in the second chain from the hook.
Hdc in the next chain.
Dc in the next chain.
Skip the next sc from Round 2.
Repeat this sequence:
5 times around.
Fasten off, leaving a long tail for sewing. RHC0518-015435M
You should now have a five-pointed star.
Repeat once more to create the second star.
Why the Star Is Made Twice
Instead of using one thin crochet star, the pattern calls for two.
During finishing, they’re placed:
wrong sides together
and sewn to one another.
That creates a more substantial topper that can stand out better above the layered leaves.
The completed double-sided star is then sewn onto the top of the cone cover. RHC0518-015435M
How to Assemble the Crochet Christmas Tree
This is where all those individual pieces finally become the gorgeous tree shown on page 1.
First:
Weave in the ends.
Keep the long sewing tails you intentionally left on the leaves.
All leaves are sewn onto the:
single crochet rounds of the cone cover.
Start at the bottom and work upward.
The pattern instructs you to:
alternate colors
and
overlap the leaves on each row. RHC0518-015435M
This overlap is essential.
If every leaf sits directly above the leaf below it, the tree may look striped or overly structured.
Offsetting them creates the full, layered evergreen appearance visible in the photograph.
Bottom Layer – Round 22
Beginning along:
Round 22
arrange:
7 Color A Large Leaves
around the cone.
Place their straight side edges so they touch.
Sew them securely in place.
Round 20
Attach:
7 Color B Large Leaves
around Round 20.
Overlap their placement relative to the leaves below.
Round 18
Attach:
7 Color A Large Leaves
around Round 18.
Overlap the previous layer.
Ease the leaves to fit where necessary.
Round 16
Attach:
7 Color B Large Leaves.
Round 14
Attach:
7 Color A Large Leaves.
Round 12
Attach:
7 Color B Large Leaves.
Round 10
Attach:
7 Color A Large Leaves.
At this stage, most of the tree should be covered with the large overlapping leaves.
The alternating Lettuce and Evergreen shades create the beautiful two-tone effect visible in the page 1 photograph. RHC0518-015435M
Add the Medium Leaves
As you move higher up the cone, switch to smaller leaves.
Around:
Round 8
attach:
7 Color B Medium Leaves.
Overlap the previous layer and ease them to fit.
Around:
Round 6
attach:
7 Color A Medium Leaves.
Again, overlap the previous row.
The gradual decrease in leaf size keeps the tree narrowing naturally toward the top. RHC0518-015435M
Add the Upper Leaves
The source then instructs:
Around:
Round 4
attach:
7 Color B Small Leaves.
Around:
Round 2
attach:
7 Color A Smallest Leaves. RHC0518-015435M
As noted earlier, this creates a discrepancy because the Small Leaves section itself says to make seven in Color A, while the assembly requires seven in Color B.
For an article based faithfully on this PDF, I would not silently rewrite one instruction. If reproducing the photographed tree, review your yarn quantities and the page 1 image before deciding which instruction to follow.
Attach the Crochet Star
Place your two metallic white stars:
wrong sides together.
Sew around them to create one double-sided star.
Then sew the completed star securely onto:
the top of the Cone Cover.
The photograph on page 1 shows the white star standing above the smallest green leaves, providing a bright finishing detail.
Finish the Bottom of the Tree
The final step uses the white peel-and-stick felt included in the materials list.
Cut:
a felt circle
sized to fit the bottom edge of the foam cone.
Secure the felt circle in place. RHC0518-015435M
This gives the base a cleaner finished appearance and covers the exposed foam underneath.
Understanding the Leaf Placement
The assembly can look overwhelming when you first see how many leaves are required, but there is a very clear pattern.
You work from:
largest to smallest
and:
bottom to top.
The placement progresses approximately like this:
Round 22 – Large A
Round 20 – Large B
Round 18 – Large A
Round 16 – Large B
Round 14 – Large A
Round 12 – Large B
Round 10 – Large A
Round 8 – Medium B
Round 6 – Medium A
Round 4 – Small
Round 2 – Smallest A
Each layer contains:
7 leaves.
That repeated seven-leaf structure makes assembly much easier to organize.
Why the Leaves Are Overlapped
Look closely at the photograph on page 1 and you’ll notice that the leaves aren’t arranged in rigid vertical columns.
Instead, they overlap like shingles.
This does two things.
First, it hides much of the crocheted cone cover underneath.
Second, it creates the dimensional layered texture that makes the project resemble a stylized evergreen tree.
When attaching a new row, position each leaf so it fills some of the visual gap between the leaves underneath.
Tips for Making This Crochet Tree Successfully
Make the Cover Before the Leaves
This gives you the actual structure you’ll eventually decorate and helps you understand the scale of the project.
Check the Foam Cone Fit
After Round 25, carefully slide the cover onto the cone as directed.
Don’t wait until after attaching dozens of leaves to discover that the cover doesn’t fit correctly.
Leave Long Sewing Tails
The source repeatedly instructs you to leave a long tail on every leaf.
Doing this saves you from cutting and joining separate yarn every time you attach one.
Organize Your Leaves by Size and Color
You are making many similar pieces.
Create separate groups for Large A, Large B, Medium A, Medium B, Small, and Smallest leaves.
Work Assembly From Bottom to Top
Don’t start near the star.
The upper leaves need to overlap the rows below, so the source’s bottom-up order is important.
Keep the Leaves Offset
Avoid stacking every leaf directly above another.
The instructions specifically call for overlapping placement.
Check the Tree From Every Side
Because this is a three-dimensional centerpiece, rotate the cone periodically while sewing.
Make sure the fullness looks balanced from all angles.
Styling Your Finished Crochet Christmas Tree
The page 1 photograph shows the tree used as a holiday table decoration beside white dinnerware, glassware, and red-and-white Christmas linens.
That setting makes perfect sense because the centerpiece is tall enough to stand out while remaining narrow enough for tabletop use.
But the original description also suggests using it elsewhere around the home or workplace. RHC0518-015435M
It could look lovely on an entryway console, mantel, sideboard, kitchen shelf, bookcase, office desk, or reception counter.
Because the design uses two traditional greens and a white star rather than lots of bright embellishments, it can work with many different Christmas decorating styles.
Frequently Asked Questions
Is the Make It Merry Crochet Tree beginner-friendly?
The original pattern is rated:
Easy.
However, it is a relatively involved project because you need to crochet and sew many individual leaves.
The stitches themselves are basic.
Who designed the crochet tree?
The pattern was designed by:
Michele Wilcox.
How tall is the finished tree?
The centerpiece measures approximately:
13″ / 33 cm tall
not including the star.
What yarn is used?
The original uses:
Red Heart With Love in Lettuce and Evergreen.
The star uses:
Red Heart With Love Metallic in White.
What crochet hook do I need?
Use:
4 mm / U.S. G-6
or another size necessary to obtain gauge.
What foam cone do I need?
The source specifies a cone measuring:
4″ / 10 cm diameter at the base
by:
12″ / 30.5 cm tall.
What is the gauge?
The source specifies:
16 dc = 4 inches
and:
12 rows = 5 inches
in double crochet.
Is the tree crocheted directly around the foam cone?
No.
You crochet the Centerpiece Cover first.
After fastening off, carefully slip the completed cover over the foam cone.
Are the leaves crocheted directly onto the cover?
No.
Every leaf is made separately and then sewn onto the single crochet rounds of the cover.
Are the cover stitches worked normally?
The source specifies that stitches of the cover are worked:
in the back loops only.
How many rounds are in the cone cover?
The cover finishes after:
Round 25.
How many large leaves do I make?
The Large Leaves section calls for:
28 with Color A
and:
21 with Color B.
That gives:
49 large leaves total.
How many medium leaves do I make?
Make:
7 with Color A
and:
7 with Color B
for:
14 medium leaves total.
How many stars do I crochet?
Make:
2 stars
using White Metallic yarn.
They are sewn together before being attached to the top.
Why do I need peel-and-stick felt?
A felt circle is cut to fit the bottom of the foam cone and secured in place during finishing.
Should I attach the leaves from top to bottom?
No.
The source specifically says to start from the:
lower edge
and work toward the top.
Do the leaves overlap?
Yes.
Every successive layer should overlap the previous row.
Can I Make the Tree in Different Colors?
The original pattern specifies Lettuce, Evergreen, and Metallic White.
Changing the palette would be a creative modification rather than part of the source instructions.
The two-green combination is especially effective because alternating shades makes the layered leaves much easier to see.
Using only one green would create a more uniform tree, while other color combinations could create a less traditional holiday centerpiece.
Why This Project Looks More Complicated Than It Is
The finished tree is covered in dozens of layered leaves, so at first glance it looks like a highly advanced crochet project.
But each individual component is relatively straightforward.
The cone cover alternates basic single and double crochet rounds.
The leaves use simple combinations of:
sc, hdc and dc.
The star uses:
sc, hdc, dc, chains and slip stitches.
The real work is repetition and assembly.
That is why an Easy skill rating makes sense even though the finished centerpiece appears impressively detailed.
Final Thoughts
The Make It Merry Crochet Tree is one of those projects where the transformation happens gradually.
You begin with a tiny:
chain 4.
That becomes the top of a fitted crochet cone.
Round after round, the stitch count grows until the cover is wide enough to slide over a 12-inch foam form.
At that point, it still doesn’t look much like the lush Christmas tree in the photograph.
Then come the leaves.
One large leaf.
Another.
And another.
Before long, you have piles of light Lettuce green and deep Evergreen crochet pieces waiting to be attached.
Starting around Round 22, seven large leaves form the first layer.
Then another seven overlap them.
And another seven.
As you work upward, the leaves gradually become smaller, allowing the silhouette to taper naturally toward the top.
Finally, two little metallic white stars are crocheted, sewn together, and attached above the smallest leaves.
That’s when the project truly comes together.
The plain foam cone has disappeared completely beneath layers of crochet, replaced by the dimensional handmade Christmas tree shown on page 1.
At approximately 13 inches tall before the star, it’s large enough to make a beautiful holiday centerpiece while still being easy to display around the home.
Use it on your Christmas dinner table, place it on a mantel, decorate a shelf, or bring a little handmade holiday cheer to your workspace.
The stitches are simple.
The construction is clever.
And the finished result looks far more elaborate than the individual steps suggest.
If you enjoy Christmas crochet projects that become decorations you can bring out year after year, this one is especially lovely.
Happy crocheting and Merry Christmas!