Cedar the Amigurumi Woodland Fox
Cedar is a small woodland fox with a warm copper coat, chocolate paws, a cream muzzle, and a plump tail with a pale tip. The face is entirely embroidered: two sleepy eye arches, a tiny nose, and a short mouth. Pointed ears make the silhouette easy to recognize even before the finishing details are added.
The construction is a collection of simple three-dimensional shapes. You work the pear-shaped body and round head separately, leaving matching neck openings for sewing. The arms, feet, ears, muzzle, and tail are added with a tapestry needle. There are no clothing pieces or complicated stitch patterns to interrupt the shaping.
This newly drafted design takes only the general idea of a small crocheted animal from the supplied Crochet Square Bear reference. Cedar changes the species, proportions, colors, construction, face, and appendages. Its rounded spiral construction and tapered tail differ from the reference’s flat-panel bear. The source instructions and photographs are not reproduced.
Pattern status: Stitch arithmetic has been reviewed, but this draft has not been physically crocheted or tested. Finished dimensions, yarn use, attachment positions, ear posture, and sitting balance are estimates. All four images are AI-generated concepts, not photographs of a sample made from these instructions. Follow the written counts and assess a physical sample before presenting this as a tested pattern.

Project Overview
The intended finished height is approximately 16–19 cm including the ears, using DK cotton and a 3 mm hook. This estimate depends on your yarn and tension. A starting gauge of about 22 single crochet stitches and 25 rounds per 10 cm should create a compact fabric, but it does not establish the final size on its own.
Cedar suits a confident beginner who can work in spiral rounds, increase, decrease, and sew small pieces. The most careful work happens during assembly: finding a centered face, positioning the ears evenly, and joining the two neck openings without twisting the head.
Make a small filled sample if the yarn is unfamiliar. You want stitches that hide the fiberfill while remaining comfortable to crochet. A smaller hook can help close gaps, but forcing very tight stitches usually makes the work harder on your hands.
Materials
- DK cotton yarn in burnt orange or copper, approximately 100–140 m.
- Cream DK cotton yarn, approximately 25–40 m.
- Dark chocolate DK cotton yarn, approximately 20–30 m.
- Black embroidery thread or a thinner black yarn for the face.
- A 3 mm crochet hook, or another size that gives dense, comfortable fabric.
- Suitable fiberfill, a blunt tapestry needle, scissors, removable stitch markers, and temporary assembly pins.
These yarn amounts include a margin for sewing, but they are not measured sample requirements. Use main colors of similar thickness so the muzzle and paws stay in proportion. Leave generous sewing tails on the smaller pieces.
This pattern does not establish suitability for babies or young children. Loose stuffing and detached parts can be hazardous. Choose materials for the intended recipient and assess all seams and embroidered details on the finished item. This written version uses an embroidered face rather than plastic eye hardware.
Abbreviations and Working Notes
US crochet terminology is used throughout.
| Term | Meaning |
|---|---|
| MR | Magic ring |
| sc | Single crochet |
| inc | Work 2 sc into the same stitch |
| dec | Decrease 2 stitches into 1 |
| st / sts | Stitch / stitches |
| R | Round |
| (instructions) × number | Repeat the bracketed sequence the stated number of times |
Work in continuous spiral rounds without joining or adding turning chains. Place a marker in the first stitch of every round and move it as you proceed. The count after each instruction is the total stitches after completing that round.
For an invisible decrease, insert the hook under the front loop of each of the next two stitches, yarn over and pull through both front loops, then yarn over and pull through the remaining two loops. A standard single crochet decrease can also be used, though its texture may be more visible.
When a six-stitch opening is flattened, its edge forms three pairs of stitches. A closing row of three sc passes through both layers, one pair at a time. This is a short row across the opening, not an additional round around it.
Pattern: Copper Body
Begin at the bottom with orange yarn. The final 18-stitch opening becomes the neck.
- R1: 6 sc into an MR. Tighten the center. 6 sts.
- R2: Inc in every stitch. 12 sts.
- R3: (1 sc, inc) × 6. 18 sts.
- R4: (2 sc, inc) × 6. 24 sts.
- R5: (3 sc, inc) × 6. 30 sts.
- R6: (4 sc, inc) × 6. 36 sts.
- R7–R12: Sc in every stitch for six rounds. 36 sts each round.
The piece should now resemble a deep rounded cup. Keep the right side outward and secure the starting tail inside. Count the opening before starting the shoulders.

- R13: (4 sc, dec) × 6. 30 sts.
- R14: (3 sc, dec) × 6. 24 sts.
- R15: (2 sc, dec) × 6. 18 sts.
- R16: Sc in every stitch. 18 sts.
Fasten off with a 45 cm sewing tail. Leave the neck open. Do not draw the final 18 stitches together.
Add filling through the neck in small tufts, shaping the base into a softly rounded seat. Leave the very top slightly underfilled until the head is ready to join. Choose a smooth front and mark it independently of the spiral round marker, which may have drifted around the piece.
Pattern: Round Head
With orange yarn, begin at the crown and work downward toward the neck.
- R1: 6 sc into an MR. 6 sts.
- R2: Inc in every stitch. 12 sts.
- R3: (1 sc, inc) × 6. 18 sts.
- R4: (2 sc, inc) × 6. 24 sts.
- R5: (3 sc, inc) × 6. 30 sts.
- R6: (4 sc, inc) × 6. 36 sts.
- R7–R11: Sc in every stitch for five rounds. 36 sts each round.
Leave the head open while preparing the muzzle and face. Add a little temporary filling to see its shape, then remove some if you need more room for the needle. Choose the face front on a smooth section of fabric.
Pattern: Cream Muzzle
With cream yarn, make one small rounded patch.
- R1: 6 sc into an MR. 6 sts.
- R2: Inc in every stitch. 12 sts.
- R3: (1 sc, inc) × 6. 18 sts.
- R4: Sc in every stitch. 18 sts.
Fasten off with a 35 cm sewing tail. This last plain round creates a shallow cup. Add only a thin layer of filling so it becomes a gently raised muzzle rather than a separate ball.
Pin the muzzle to the lower center of the face, centered approximately around head R10, with its upper edge below the planned eyes. The patch spans several rounds; check its edges against your actual gauge. If its lower edge extends beyond the existing fabric, finish the head shaping below before sewing that edge. Sew around the perimeter, adding the thin layer of filling before closing the last gap. Keep the neck edge clear for joining.
Embroider a tiny black triangular nose near the upper center of the cream area with a few short stitches. Add a short line downward and two small angled stitches for the mouth. Secure the embroidery ends inside the muzzle before finishing its perimeter seam.
For the eyes, make two closed arches on the orange head around R8, one on either side above the muzzle. Each can span approximately two head stitches. Check their height from straight ahead before securing the ends inside the still-open head.
Finish Shaping the Head
Continue the head in orange.
- R12: (4 sc, dec) × 6. 30 sts.
- R13: (3 sc, dec) × 6. 24 sts.
- R14: (2 sc, dec) × 6. 18 sts.
Fasten off and secure the working end, leaving the head opening accessible. Do not close these 18 stitches. They will meet the body’s 18 neck stitches one to one.
Finish sewing the muzzle edge if you postponed any stitches. Fill the head evenly, using small tufts around the cheeks and crown. Leave room at the opening for the final neck filling. The head should hold its shape without becoming so firm that the facial stitches sink into the surface.
Pattern: Pointed Ears, Make Two
With orange yarn, begin at each ear tip.
- R1: 4 sc into an MR. 4 sts.
- R2: (Inc, 1 sc) × 2. 6 sts.
- R3: (1 sc, inc) × 3. 9 sts.
- R4: (2 sc, inc) × 3. 12 sts.
- R5–R6: Sc in every stitch for two rounds. 12 sts each round.
Leave the ears unstuffed. Flatten each opening into six pairs and work a closing row of 6 sc through both layers. Fasten off with a 35 cm tail.
Add a few short cream stitches to the front surface of each ear to suggest a small inner triangle. Keep the stitches within the orange outline and secure their ends inside the ear layers. Do not add a separate fabric patch.
Pin the ears to the upper left and right sides of the head, approximately around R3–R5. Check the points from the front, then sew each six-stitch base securely to sound head loops. Reinforce the back of the base if needed to support the angle without denting the crown.
Pattern: Arms, Make Two
Begin each paw with dark chocolate yarn.
- R1: 6 sc into an MR. 6 sts.
- R2: Inc in every stitch. 12 sts.
- R3: Sc in every stitch. 12 sts.
Change to orange on the final yarn-over of the last stitch of R3. Secure the chocolate tail on the inside.
- R4–R7: Sc in every stitch for four rounds. 12 sts each round.
Place a little filling in the dark paw, keeping the upper arm soft.
- R8: Dec × 6. 6 sts.
Flatten the opening and work a closing row of 3 sc through both layers. Fasten off with a 30 cm sewing tail. Turn the small color-change jog toward the inner arm during assembly.
Pattern: Feet, Make Two
With dark chocolate yarn:
- R1: 6 sc into an MR. 6 sts.
- R2: Inc in every stitch. 12 sts.
- R3–R5: Sc in every stitch for three rounds. 12 sts each round.
Add a small amount of filling and shape a rounded paw.
- R6: Dec × 6. 6 sts.
Fasten off with a 35 cm tail. Thread through the front loops of the remaining six stitches and close. Leave the tail outside for sewing. Compare both feet before attaching them; matching their filling matters as much as matching their round count.
Pattern: Cream-Tipped Tail
Start at the tip with cream yarn.
- R1: 6 sc into an MR. 6 sts.
- R2: (1 sc, inc) × 3. 9 sts.
- R3: (2 sc, inc) × 3. 12 sts.
- R4–R5: Sc in every stitch for two rounds. 12 sts each round.
Change to orange on the final yarn-over of R5 and secure the cream tail inside.
- R6: (1 sc, inc) × 6. 18 sts.
- R7–R10: Sc in every stitch for four rounds. 18 sts each round.
- R11: (1 sc, dec) × 6. 12 sts.
- R12: Sc in every stitch. 12 sts.
Lightly fill the cream tip and broad orange section. Keep the narrow base flexible so the tail can rest along the body.
- R13: Dec × 6. 6 sts.
Flatten the opening and work a closing row of 3 sc through both layers. Fasten off with a 40 cm sewing tail. Gently curve the filled tail; it does not contain a wire and should not be forced into a rigid shape.
Assembly: Build Cedar’s Seated Pose
There are ten crochet pieces: body, head, muzzle, two ears, two arms, two feet, and tail. The muzzle and ears may already be attached to the head. Keep the body neck open while positioning its smaller parts, so you can access the interior if needed.
Sew the Feet and Arms
Pin the feet to the lower front of the body, approximately across R3–R6, with a small gap between them. Their closed ends sit against the torso and their rounded fronts project forward. Sew around each closed end and include a few adjacent underside stitches to reduce swiveling.
Pin the arms to the upper sides of the body around R12–R14. Point the brown paws downward and slightly forward. Sew each three-stitch closed base securely to the orange body, adding a few small reinforcing stitches behind the base as needed.
Place the torso on a level surface and compare both sides. Adjust the parts before completing seams. Sitting balance is not guaranteed by this untested draft; the head and tail will also affect it.
Position the Tail
Pin the narrow orange tail base at the lower back, approximately around body R4–R7. Allow the fuller section to curve gently along one side, with the cream tip visible near the front.
Sew the three-stitch closed base firmly to the body and add a few stitches along the adjacent orange side of the base for a broader attachment. If desired, add one discreet orange tack between the middle of the tail and the lower side of the torso to hold the curve. Keep the cream tip free.
Join the Matching Neck Openings
Align the head face with the marked front of the body. Both openings contain 18 stitches. Use four markers to divide the seam into matching sections of 5, 4, 5, and 4 stitches; this helps keep one edge from gathering against the other.
With the body’s long tail, sew one head edge stitch to one body edge stitch all the way around. Catch sound loops from each edge and keep the tension even. Leave the final few pairs open while adding the last small tufts of filling through the neck gap.

Support the neck evenly so the head does not fold forward. Avoid packing a hard lump directly under the muzzle. Close the remaining matched pairs, secure the seam, and bury the tail inside the torso.
Remove every pin and temporary marker. Check the toy from the front, back, and sides, then gently tug each attachment. Rework loose seams and secure any exposed yarn ends.

More Information: Finishing and Variations
Keep the Face Soft
Short embroidery stitches lie more neatly than long strands pulled across the head. If an eye sinks inward, loosen it before securing the ends. A small change in eye angle can alter the expression substantially, so inspect the face while the head is still open.
Avoid Stuffing Gaps
Add fiberfill in small amounts and spread it toward the edges. Overfilling can stretch the orange fabric and make pale filling visible. If gaps appear even with light filling, change the hook or yarn before making the full project.
Try Another Woodland Palette
Rust, cinnamon, or deep terracotta can replace copper. Keep the muzzle lighter than the coat and the paws dark enough to read clearly. Color changes alone do not require new stitch counts, provided the yarns have a similar thickness.
Adding rounds to the tail or making a larger head changes the balance and yarn use. Treat those adjustments as experiments and assess a physical sample rather than assuming the original placement guides will still apply.
Care for the Finished Fox
Follow the care directions for both yarn and filling. Where those materials permit, gentle spot cleaning and thorough air drying can help preserve the face and ear shape. Do not store the fox while damp. Check its seams after cleaning or frequent handling.
Frequently Asked Questions
Is Cedar suitable for a beginner?
A confident beginner can work the shapes after practicing spiral rounds and decreases. The matching neck seam and symmetrical placement require patience. Pinning the parts before sewing makes the assembly easier to judge.
Why are the neck openings left open?
The 18-stitch head opening and 18-stitch body opening meet one to one. This creates a continuous filled neck rather than fastening a closed head onto a closed body at a small point. Do not gather either opening before joining.
Why does the tail not hold the exact curve shown?
It is a soft, lightly filled crochet piece. Yarn firmness, filling, and attachment angle affect its shape. The optional orange tack can hold it beside the body. The generated photo is a styling concept rather than proof of a particular curve.
Can I use plush yarn instead of cotton?
Plush yarn changes the scale, fabric behavior, and visibility of sewing stitches. The listed quantities and size estimate will not transfer directly. Make a sample and reassess the face and seams before adapting the full project.
Can I make the inner ears without cream embroidery?
Yes. The cream stitches are decorative and can be omitted. The orange ear shaping and six-stitch closed base remain the same.
Has this pattern been physically tested?
No. Its stitch arithmetic has been reviewed, but no finished sample has been made. Proportions, yarn use, attachment positions, sitting balance, and final dimensions still require practical validation before the draft is described as tested or used for repeated production.