Friendship Bracelet Pattern

There is something wonderfully nostalgic about making friendship bracelets.
A few colorful strands of embroidery floss, a handful of simple knots, and a quiet afternoon are really all you need to create something that feels completely personal. And even though friendship bracelets are often associated with childhood craft projects, the right pattern can look surprisingly polished and intricate.
This Friendship Bracelet Number 11 is one of those designs.
Instead of a basic stripe or simple chevron, this bracelet creates an eye-catching repeating diamond pattern using black, turquoise, pale aqua, orange, and golden-yellow embroidery floss. The dark strands outline the colorful diamonds beautifully, while the brighter colors travel through the center and edges to create a bold geometric effect.
The finished bracelet is approximately ½ inch (1 cm) wide and 7 inches (18 cm) long, although you can continue knotting until it comfortably fits your wrist. ANE0101-032262M
The project is rated intermediate, largely because you need to follow a knotting chart and understand the four standard friendship-bracelet knot combinations. But once you understand how forward and backward knots work, the repetitive knotting becomes surprisingly relaxing.
We’ll go through the materials, floss lengths, setup, basic knots, chart-reading process, braids, optional color combinations, and sliding closure so you can turn the original pattern into a finished bracelet from beginning to end.
About This Friendship Bracelet
Friendship Bracelet Number 11 was designed by Andréane Gill and uses Anchor embroidery floss.
The bracelet is constructed from multiple strands arranged in a specific color order.
Instead of weaving the threads, you create the design entirely through knots.
Each knot changes the position of the working strands. As you continue row after row, those individual knots gradually create the repeating geometric design shown in the pattern chart on page 2.
One particularly nice feature is that the bracelet doesn’t need a permanent tied closure.
You can braid both ends and create an adjustable sliding closure, making the finished bracelet much easier to put on and remove.
Pattern at a Glance
Project: Knotted friendship bracelet
Technique: Embroidery / macramé
Skill Level: Intermediate
Finished Width: Approximately ½” / 1 cm
Finished Length: Approximately 7″ / 18 cm or customized to fit your wrist
Main Material: Embroidery floss
Design: Repeating geometric diamond pattern
Finishing Options: Tie-on ends or adjustable sliding closure
Why I Love This Friendship Bracelet Design

The color pattern immediately makes this bracelet stand out.
Looking at the finished bracelet on page 1, you can see how the dark floss creates strong outlines around turquoise, pale aqua, orange, and golden sections.
The result looks almost woven.
But there is no loom involved.
Everything is created by arranging embroidery floss and tying carefully directed knots.
The pattern also includes three alternative color combinations on page 3, which means you can keep the exact same knotting structure while completely changing the personality of the finished bracelet.
Materials You’ll Need
This project doesn’t require many tools.
You will need Anchor Embroidery Floss Spools, with one spool of each listed color.
The original color numbers are:
- 0403
- 0188
- 0185
- 0304
- 0311
You will also need:
- Masking tape or transparent tape
- A flat work surface
- Optional clipboard
- Scissors
The PDF notes that the design can also be explored in other shades, with hundreds of Anchor floss colors available. ANE0101-032262M
Cut Your Embroidery Floss

Before making any knots, cut the individual strands.
For the main colorway, cut:
4 strands of Color 0403
Each should measure:
55″ / 140 cm
For the remaining colors, cut:
2 strands of each color
Each of these strands should measure:
43″ / 110 cm
Cutting the correct lengths at the beginning gives you enough floss to create the knotted bracelet and its braided ends. ANE0101-032262M
Prepare Your Friendship Bracelet Workspace
Gather all the cut floss strands together so the ends are even.
Measure approximately:
4″ / 10 cm
from the cut ends.
Tie a loose overhand knot at this point.
Don’t make this knot impossible to undo because you will remove it later.
Now secure the knot.
You can tape it directly to a table or another flat surface.
Alternatively, place it beneath the clip of a clipboard.
I like the clipboard method because you can move your project easily, but either approach works.
The important thing is keeping the strands secure while still allowing them to move freely beneath your hands.
Arrange Your Embroidery Floss
Now separate the strands.
Arrange them in the exact order shown across the top of the chart on page 2 of the PDF.
This step matters.
Friendship bracelet patterns rely on both knot direction and strand position. Starting with the colors in the wrong order will change the design, even if every knot afterward is technically correct.
Spread the strands apart slightly so you can identify each one before beginning.
Understanding Friendship Bracelet Knots
Before working through the chart, let’s understand the knot system.
The PDF explains that friendship bracelet patterns use four basic knots, but those four knots are built from only two base knot movements:
- Forward
- Backward
Each complete friendship-bracelet knot consists of two base knots.
That means you perform the indicated movement twice—or combine one forward and one backward movement—depending on the chart symbol.
How to Make a Forward Base Knot
A forward knot travels:
left to right.
Imagine that your working strand is on the left and the neighboring strand is on the right.
Step 1
Take the left working strand and bend it over the right strand.
You should create a shape resembling the number:
4
Step 2
Bring the working strand behind the stationary strand.
Pass it through the loop created by your “4.”
Step 3
Pull the knot upward toward the top of the bracelet.
Tighten it neatly.
The illustrated instructions on page 4 show this process in three stages, making the “4” shape especially easy to recognize. ANE0101-032262M
How to Make a Backward Base Knot
A backward knot travels in the opposite direction:
right to left.
Step 1
Take the right working strand and bend it across the left strand.
This time, create an:
inverted 4
Step 2
Pass the working strand behind the other strand and through the loop.
Step 3
Pull the knot upward and tighten it.
Page 4 illustrates the backward knot beside the forward version, which makes the difference between the two movements much easier to understand. ANE0101-032262M
The Four Friendship Bracelet Knots
Once you understand the two base movements, you can make all four knots used in the chart.
Page 5 of the PDF provides diagrams for each one.
Backward Knot – B
A complete backward knot consists of:
Backward + Backward
The active strand moves from right to left.
Backward-Forward Knot – BF
This knot combines:
Backward + Forward
The working strand changes direction during the knot and returns to its original side.
Forward Knot – F
A complete forward knot consists of:
Forward + Forward
The active strand travels from left to right.
Forward-Backward Knot – FB
This combines:
Forward + Backward
Again, the working strand returns to its original side.
These four combinations are the foundation of the entire bracelet.
Once you can recognize them in the chart, the complicated-looking pattern becomes much easier to understand.
How to Read the Friendship Bracelet Chart
The large diagram on page 2 is your main pattern.
At first glance, all those crossing colored strands and symbols can look intimidating.
Don’t try to understand the whole chart at once.
Instead, think of it as a sequence of rows.
Each circle represents a knot.
The symbol inside tells you which type of knot to make, while the colors show which strands are interacting.
Work one row completely before moving to the next.
Start the First Row
Begin on the left side of the pattern.
Take the first two strands.
Tie the first knot indicated on the chart.
Remember:
Each complete knot consists of two base-knot movements.
After completing the first knot, continue across the row from:
left to right
following each knot symbol in sequence.
The source instructions specifically direct you to tie the first knot using the first two strands and then continue the remaining knots from left to right. ANE0101-032262M
Start the Second Row
The second row is offset from the first.
Put the first strand on the far left aside.
Do not use it for the first knot of this row.
Instead, begin with:
the second and third strands.
Tie the first indicated knot.
Then continue working the remaining knots from left to right.
This alternating structure is what creates the staggered knot grid visible in the chart.
Don’t Worry If the Beginning Looks Messy
This is important, especially if you’re new to detailed friendship bracelet patterns.
Your first few rows may not immediately resemble the beautiful geometric bracelet shown in the photograph.
That’s normal.
The original instructions specifically note that the first rows can look a little messy but begin correcting themselves as more rows are knotted. Continue following the chart row by row rather than trying to reshape the first few rows prematurely. ANE0101-032262M
After several rows, the strands settle into position and the diamond motif becomes much clearer.
Continue the Diamond Pattern
Keep following the chart row by row.
As you progress, you will see repeating diamonds developing across the bracelet.
The main colorway uses the dark floss to frame brighter areas of turquoise, pale aqua, orange, and yellow.
Try to maintain consistent knot tension.
Each knot should be firm enough to sit neatly beside its neighbors, but don’t pull so hard that the bracelet curls dramatically.
Continue until the knotted section reaches your desired length.
The standard finished bracelet is approximately:
7″ / 18 cm
but you can customize the length to your wrist.
How to Determine the Correct Bracelet Length
Don’t forget that the final bracelet includes braided ends.
You need enough total length to comfortably put the bracelet on.
Before finishing, think about:
- The length of the knotted pattern
- The first braid
- The second braid
- Whether you’re tying the bracelet directly
- Whether you’re adding the sliding closure
The PDF specifies that the bracelet plus both braids should be long enough to slide over your hand when putting it onto your wrist. ANE0101-032262M
Undo the Temporary Knot
Remember the loose overhand knot you made at the very beginning?
Now it can come out.
The instructions say you can undo it at any point after completing at least:
4 rows
of the bracelet.
By then, the knotted section is stable enough to hold the strands in their proper arrangement.
Carefully loosen the knot without disturbing your finished bracelet.
Braid Both Ends
Separate the loose strands at one end into groups suitable for braiding.
Create a neat braid.
Repeat on the opposite end.
Try to keep both braids approximately equal in length.
These braids can be used to tie the bracelet directly around the wrist, or they can become part of the adjustable sliding closure.
How to Make a Sliding Friendship Bracelet Closure
I love this finishing option because it allows you to loosen the bracelet, slide it over your hand, and then tighten it comfortably around your wrist.
The full sliding closure is illustrated on page 6 of the PDF.
Step 1 – Cut an Extra String
Cut a separate piece of floss measuring at least:
8″ / 20 cm
Lay the two braided bracelet ends beside one another.
Step 2 – Tie a Half Knot
Using your extra string, tie a half knot around both braids.
The diagram on page 6 shows the closure strand wrapping around the two braided sections together.
Step 3 – Secure It
Tie another half knot.
This helps hold the closure in position before you begin the decorative knots.
Step 4 – Make Three Forward Knots
Tie:
3 forward knots
around both braided bracelet ends.
Keep them neat but not so tight that the braids can no longer slide.
Remember, the purpose of this closure is adjustability.
Step 5 – Secure the Closure
Finish by tying:
2 half knots
to secure the sliding section.
Step 6 – Trim
Cut away the excess closure string.
Leave approximately:
¼” / 5 mm
of the ends.
Your sliding closure is complete. ANE0101-032262M
Three Alternative Friendship Bracelet Color Ideas
One of the best things about this pattern is that you don’t have to make it in the original turquoise-and-orange palette.
Page 3 includes three complete alternative colorways.
The knot pattern stays the same.
Only the floss colors change.
Version 1 – Bright Multicolor
For Version 1, use:
4 strands of Color 0403 at 55″ / 140 cm
and two strands each of:
- 0033
- 0433
- 0289
Cut those colored strands to:
43″ / 110 cm
The diagram shows a lively combination of dark outlining with bright pink/red, turquoise blue, and pale yellow.
Version 2 – Green and White
For a cleaner botanical-looking palette, Version 2 uses:
4 strands of Color 0403 at 55″ / 140 cm
plus four strands using:
- 0265
- 0001
at:
43″ / 110 cm
The chart illustration combines dark outlines with fresh green and white.
Version 3 – Purple
The third variation creates a cool purple-toned bracelet.
Use:
4 strands of Color 0403 at 55″ / 140 cm
plus four strands using:
- 0103
- 0109
at:
43″ / 110 cm
Page 3 visually compares all three alternatives side by side, making it particularly useful when deciding what overall color mood you prefer. ANE0101-032262M
Tips for Making a Neat Friendship Bracelet
Keep Your Knots Consistent
The exact amount of tension matters less than consistency.
If some knots are extremely tight and others are loose, the edges can become uneven.
Secure Your Work Firmly
Your bracelet shouldn’t slide around while you’re knotting.
Use plenty of tape or a sturdy clipboard.
Separate Your Strands Frequently
Long pieces of embroidery floss naturally tangle.
Stop every few rows and gently separate the hanging strands.
Doing this regularly is much easier than dealing with one enormous knot later.
Follow One Row at a Time
Don’t try to mentally jump ahead through the chart.
Complete one row, check it, and then move to the next.
Watch Your Knot Direction
Forward and backward knots can look almost identical while you’re working quickly.
If a strand suddenly travels in the wrong direction, check whether you accidentally used the wrong knot.
Keep the Edges Straight
Pay particular attention to the outermost knots.
Consistent edge tension makes the entire bracelet look more polished.
Frequently Asked Questions
Is Friendship Bracelet Number 11 beginner-friendly?
The original pattern rates it intermediate.
A beginner can certainly work toward it, but I recommend practicing forward, backward, forward-backward, and backward-forward knots first.
Once those four knot combinations feel comfortable, following the chart becomes much easier.
How wide is the finished friendship bracelet?
The finished bracelet is approximately:
½” / 1 cm wide.
How long should the bracelet be?
The standard finished length is approximately:
7″ / 18 cm
or whatever length comfortably fits your wrist.
How many strands of embroidery floss do I need?
For the main version, you use four longer strands of Color 0403 plus two strands of each remaining color.
Why are the Color 0403 strands longer?
The source specifies 55-inch lengths for the four 0403 strands while the remaining strands are 43 inches. Follow those lengths to ensure you have sufficient floss for the complete design.
What are the four basic friendship bracelet knots?
They are:
Forward
Backward
Forward-Backward
Backward-Forward
Each complete knot consists of two base knot movements.
Why does my bracelet look messy at the beginning?
The first several rows may not immediately settle into the final shape.
The pattern specifically warns that this can happen and recommends continuing to knot according to the chart.
Can I use different colors?
Absolutely.
The PDF itself provides three alternative palettes in addition to the main color combination.
Just be careful to preserve the strand arrangement represented by the chart if you want the same geometric design.
Do I need a clipboard?
No.
A clipboard is optional.
You can tape the initial knot securely to a flat surface instead.
Can I make the bracelet adjustable?
Yes.
The pattern provides instructions for an adjustable sliding closure made around the two braided ends using an additional piece of floss.
How long should the sliding-closure string be?
Use an additional strand measuring at least:
8″ / 20 cm.
Do I have to use a sliding closure?
No.
The instructions allow you to either tie the bracelet on or make the sliding closure.
Final Thoughts
I think one of the most satisfying things about friendship bracelets is how little you need to make something that looks so detailed.
There is no expensive equipment.
No sewing machine.
No complicated collection of craft tools.
You begin with embroidery floss, scissors, and something as simple as a piece of tape.
At first, the strands are just hanging separately from your workspace.
Then you make the first knot.
And another.
You finish the first row, offset the next one, and continue following the pattern.
For a little while, it might not look like much.
But gradually those individual knots begin forming lines. The lines turn into diamonds. The turquoise, orange, yellow, aqua, and black start interacting, and suddenly you can see the same bold geometric design that appears in the original chart.
Then you braid the ends, add the sliding closure, and something made entirely from loose strands of embroidery floss becomes a bracelet you can actually wear.
Make the original color combination first, or choose one of the three alternative palettes from the pattern. Once you understand the knot sequence, you can also start experimenting with your own favorite colors.
That’s part of what makes friendship bracelets so enjoyable.
The technique stays beautifully simple, while the possibilities for color and personality feel almost endless.
Happy knotting!