Popping Fringe Crochet Wall Hanging: A Bold, Textured Macrame-Style Pattern

Popping Fringe Crochet Wall Hanging Not every fiber art wall piece needs to be knotted by hand. The Popping Fringe Crochet Wall Hanging from Bernat…

by 

Popping Fringe Crochet Wall Hanging

Not every fiber art wall piece needs to be knotted by hand. The Popping Fringe Crochet Wall Hanging from Bernat proves that a crochet hook can achieve the same dramatic, boho-inspired look as traditional macrame — a triangular panel built from raised popcorn stitches, topped with a long cascading fringe, all in a single warm amber colorway.

Rated Easy, this pattern is a great weekend project if you’re comfortable with basic double crochet and want to try the popcorn stitch, a raised, textured technique that gives the piece its signature “popping” dimensional surface. Worked in a super bulky yarn on a large 15mm hook, this wall hanging comes together quickly despite its striking finished size, and the whole thing mounts easily onto a simple wooden dowel for hanging.

Below is the complete pattern, reorganized with clear headings, along with the full materials list, gauge, abbreviations, and a set of tips and frequently asked questions to guide you through the popcorn stitch and fringe finishing.

Finished Measurements

The wall hanging measures approximately 27″ [68.5 cm] wide x 48″ [122 cm] long, including the fringe — a substantial, statement-making size for a piece of wall art.

What You’ll Need

Yarn: Bernat® Maker Big™ (8.8 oz/250 g; 66 yds/60 m) — Amber (25009), 4 balls.

Hook and hardware:

  • Size U.S. P/Q/19 (15mm) crochet hook, or the size needed to obtain gauge
  • 30″ [76 cm] long wooden dowel, for mounting the finished piece

Gauge

  • 4 sts and 2.5 rows = 4″ [10 cm] in pattern

Because this piece is a decorative wall hanging rather than a fitted item, gauge mostly affects the finished proportions — but with such a large hook and bulky yarn, it’s still worth swatching briefly to make sure your popcorn stitches have room to pop without the fabric becoming too dense or too loose.

Abbreviations

AbbreviationMeaning
ApproxApproximately
BegBeginning
ChChain
DcDouble crochet
PatPattern
PopcornWork 4 dc into the same stitch. Drop the loop from the hook. Insert the hook from front to back into the first dc of the 4-dc group. Pull the dropped loop through the stitch. Chain 1 to secure the popcorn.
RepRepeat
RSRight side
St(s)Stitch(es)
WSWrong side

A Note Before You Start

Throughout this pattern, chain 3 at the beginning of a row always counts as a double crochet. Additionally, since the popcorn stitches are worked from the wrong side of the fabric in several rows, remember to push each popcorn through from the wrong side (WS) to the right side (RS) as you complete it, so the raised texture pops out on the correct side of the finished piece.

Crocheting the Wall Hanging

The piece begins as a small triangle point and grows steadily wider, row by row, adding popcorn stitches in an increasingly wide, evenly spaced pattern as the width increases.

Foundation and First Rows

Chain 7.

  • 1st row (RS): 1 dc in the 4th chain from the hook, then 1 dc in each chain to the end. Turn — 5 dc.
  • 2nd row: Chain 3, 1 dc in the first dc, 1 dc in each dc to the last dc, 2 dc in the last dc. Turn — 7 dc.
  • 3rd row: Chain 3, 1 dc in the first dc, 1 dc in each of the next 2 dc, popcorn in the next dc, 1 dc in each of the next 2 dc, 2 dc in the last dc. Turn — 9 sts.
  • 4th row: Chain 3, 1 dc in the first st, 1 dc in each of the next 2 sts, popcorn in the next st, 1 dc in the next st, popcorn in the next st, 1 dc in each of the next 2 sts, 2 dc in the last st. Turn — 11 sts.
  • 5th row: Chain 3, 1 dc in the first st, 1 dc in each of the next 2 sts. *Popcorn in the next st, 1 dc in the next st; repeat from * to the last 2 sts. 1 dc in the next st, 2 dc in the last st. Turn — 13 sts.

Building the Popcorn Field

  • 6th to 12th rows: Repeat the 5th row. By the end of the 11th row, you’ll have 27 sts.

Shaping the Top

  • 13th row: Chain 3, 1 dc in each of the next 2 sts. *Popcorn in the next st, 1 dc in the next st; repeat from * to the last 2 sts. 1 dc in each of the last 2 sts. Turn — 27 sts.
  • 14th row: Chain 3, 1 dc in the next st. *Popcorn in the next st, 1 dc in the next st; repeat from * to the last st. 1 dc in the last st. Turn.
  • 15th row: Chain 3, 1 dc in each st to the end of the row. Fasten off.

This final plain row of double crochet creates a clean, popcorn-free border along the top edge, right before the fringe and dowel attachment.

Finishing

Bottom Fringe

Cut lengths of yarn 48″ [122 cm] long. Taking one strand at a time, fold it in half and knot it into fringe along the entire bottom edge of the wall hanging, working point to point along the triangle’s lower sides. Trim the fringe as shown in the pattern’s reference photo, either straight across or angled to follow the triangle’s shape.

Mounting to the Dowel

Using a whip stitch, attach the top edge of the wall hanging to the wooden dowel, securing it evenly along its length so the piece hangs straight.

Side Edge Fringe (Cast-On and Cast-Off Edges)

In addition to the main bottom fringe, cut yarn lengths 10 to 14 inches [25.5 to 35.5 cm] long. Taking 2 or 3 strands together for each fringe knot, add fringe across the cast-on and cast-off edges — the side edges of the piece. Trim this fringe evenly to finish.

Tips for Crocheting the Popping Fringe Wall Hanging

  • Practice the popcorn stitch on a small swatch first. Since this entire piece is built around the popcorn technique, working through the four-step sequence (4 dc into the same stitch, drop the loop, insert front to back into the first dc, pull the dropped loop through, chain 1 to secure) a few times on scrap yarn will make the actual pattern rows go much faster.
  • Always push popcorns to the right side as you go. Because several rows are worked with the wrong side facing, it’s easy to forget this step in the moment — pausing after each popcorn to physically push it through to the front will keep your texture consistent and prevent any popcorns from getting trapped on the wrong side.
  • Use a large-eyed tool or your fingers for the fringe knots. With such thick, bulky yarn, a crochet hook can sometimes be easier than a fringe tool for pulling folded strands through the edge stitches — use whichever method gives you the most control with this yarn weight.
  • Measure your dowel placement before whip stitching. Since the dowel is 30″ long and the finished piece is 27″ wide, center the panel along the dowel’s length before you start stitching, so the hanging is evenly balanced once mounted.
  • Trim the fringe in stages. Rather than cutting all the fringe to length in one pass, trim a little at a time and step back to check the overall shape against the reference photo — this is much easier to correct than fringe cut too short on the first try.

Frequently Asked Questions

What skill level is required for this pattern? This pattern is rated Easy. It’s built primarily from double crochet plus the popcorn stitch, a slightly more textured technique that’s still very approachable once you’ve practiced it a few times.

How much yarn do I need? The pattern calls for 4 balls of Bernat Maker Big in the Amber colorway, each 8.8 oz and 66 yards, for a total of roughly 264 yards.

What size hook does this pattern use? A large U.S. size P/Q/19 (15mm) hook, which matches the bulky weight of the yarn and helps the popcorn stitches stay open and dimensional rather than tight and compressed.

What is a popcorn stitch, exactly? A popcorn stitch is a raised, three-dimensional bobble created by working several stitches (4 dc, in this pattern) into the same stitch, then closing them into a compact cluster by dropping the loop, reinserting the hook into the first stitch of the group, and pulling the dropped loop through. The result is a small, rounded bump that “pops” out from the surface of the fabric.

How is the wall hanging mounted for display? The finished piece is attached to a 30″ wooden dowel using a whip stitch along the top edge, allowing it to hang from the dowel much like a piece of macrame.

Why are there two different fringe sections in the finishing instructions? The main fringe, cut to 48″ lengths and knotted one strand at a time, runs along the bottom edge of the triangle for the long, cascading look shown in the photo. A second, shorter fringe (cut to 10–14 inches, with 2–3 strands per knot) is added separately along the cast-on and cast-off side edges of the piece for a fuller, more finished look along the sides.

Do I need special macrame skills to make this piece? No — despite the macrame-inspired finished look, this entire wall hanging is made using standard crochet techniques (chains, double crochet, and the popcorn stitch) plus basic fringe-knotting for finishing, which is a simple folding and pulling technique rather than true macrame knotwork.

Can I make this piece in a different color? Certainly — while the sample is shown in a warm Amber shade, the same construction and yardage would work with any color of Bernat Maker Big or a similar super bulky yarn, letting you match the piece to your own space.

A Statement Piece Worth Hanging

Between its raised, textural popcorn stitches and dramatic cascading fringe, the Popping Fringe Crochet Wall Hanging delivers a genuinely striking piece of fiber art from a relatively short, approachable pattern. The bulky yarn and oversized hook mean this project moves quickly compared to its finished impact, making it a satisfying weekend project for anyone looking to bring a bit of warm, textured boho style into a room.

Whether it’s mounted above a bed, a reading nook, or an empty stretch of wall that’s been waiting for the right piece, this wall hanging proves that crochet can hold its own right alongside traditional macrame.

Leave a Reply

Your email address will not be published. Required fields are marked *