Christmas Tree Bag: A Ruffled, Pompom-Trimmed Drawstring Pouch Shaped Like a Tree

Christmas Tree Bag Some holiday crochet projects decorate the tree. This one is the tree — a plump, tiered drawstring bag shaped like a classic…

by 

Christmas Tree Bag

Some holiday crochet projects decorate the tree. This one is the tree — a plump, tiered drawstring bag shaped like a classic layered Christmas tree, complete with a stitched brown trunk, three ruffled rings of “branches” edged in contrasting scalloped trim, a golden star charm threaded onto the drawstring, and a twisted red-and-white candy-cane strap for carrying it over your shoulder. Fill it with a small gift, tuck a little treat inside, or use it as festive everyday storage — either way, it’s one of those projects that gets a genuine gasp when people see it.

This pattern works up in a fine sport-weight yarn, giving the finished piece nice detail and drape without becoming bulky. Every section — trunk, body, three separate rings of ruffled leaves, star charm, drawstrings, and shoulder strap — is built from straightforward single, half double, and double crochet, worked in the round. The real craftsmanship here is in the assembly: each ring of leaves attaches directly into the front loops of a specific round on the body, which is what creates that tiered, cascading tree silhouette.

Let’s build this little tree bag, layer by layer.

Why This Bag Is Worth Making

What makes this project so satisfying is watching a fairly ordinary round bag shape transform into something so recognizably tree-like through the leaf rings alone. Each ring is worked separately, attached into the front loops of an earlier round on the body, and finished with a contrasting white edge that reads as snow dusting the branches. Layer three of those rings at different heights, and the whole piece takes on a genuinely convincing tiered Christmas tree silhouette.

It’s also a wonderfully complete little project in the sense that nothing is left generic. The star charm threaded onto the drawstrings serves as both a functional pull and a decorative topper. The twisted two-tone shoulder strap looks like a candy cane. And the small pompoms scattered across the finished bag stand in for ornaments. Every element earns its place.

Understanding the Abbreviations

  • MR = Magic Ring
  • Rnd = Round
  • SC = Single Crochet
  • HDC = Half Double Crochet
  • DC = Double Crochet
  • INC = Increase (2 single crochets in the same stitch)
  • DC INC = Increase Double Crochet (2 double crochets in the same stitch)
  • DEC = Decrease SC (crochet 2 single crochets together)
  • CH = Chain
  • ST/STS = Stitch/Stitches
  • SL ST = Slip Stitch
  • SK = Skip
  • FLO = Front Loops Only
  • BLO = Back Loops Only
  • FO = Fasten Off

Gathering Your Supplies

Yarn

  • Yarn weight: 2 (Sport), approximately 1.76 oz/50 g and 131 yds/120 m per skein
  • Total amount needed: approximately 2.5 oz/70 g across your colors (green, white, dark brown, yellow, and red)

Hook

  • Whatever size is comfortable for you with a sport-weight yarn — a C/2.50mm hook was used for the sample shown

Additional Supplies

  • Stuffing (for the trunk)
  • Scissors
  • Stitch marker
  • Sewing needle
  • Small craft pompoms, for decorating the finished bag

Crocheting the Trunk

Using dark brown yarn, chain 13. Stitches for this first round are worked around both sides of the foundation chain, giving you an oval rather than a straight strip.

Rnd 1: Starting in the second chain from the hook: 11 SC, then 3 SC in the last chain. Continue working down the other side of the foundation chain: 10 SC, then an INC in the final chain — 26 sts.

Rnd 2: 2 INC, 10 SC, 3 INC, 10 SC, INC — 32 sts.

Rnd 3: (SC, INC) x2, 10 SC, (SC, INC) x3, 11 SC, INC — 38 sts.

Rnd 4: (2 SC, INC) x2, 10 SC, (2 SC, INC) x3, 12 SC, INC — 44 sts.

Rnd 5: Working in the back loops only (BLO): 44 SC — 44 sts. This back-loop round creates the visible seam line where the trunk’s rounded bottom meets its straighter upper section.

Rnd 6: (2 DC, DC2tog) x11 — 33 sts.

Rnd 7: 33 DC — 33 sts.

Rnd 8: (2 DC, DC2tog) x8, DC — 25 sts.

Rnds 9–10: 25 DC — 25 sts, worked over 2 rounds.

Stuff the trunk lightly, then cut the yarn, leaving a long tail for sewing.

Crocheting the Stars (Make 2)

Using yellow yarn:

Rnd 1: 5 SC in a magic ring — 5 sts.

Rnd 2: (INC) x5 — 10 sts.

Rnd 3: (INC, SC) x5 — 15 sts.

Rnd 4: (2 SC, INC) x5 — 20 sts.

Rnd 5: ([SC, HDC, DC, HDC, SC], 3 SLST) x5 — 40 sts. Note that the bracketed group of five stitches (SC, HDC, DC, HDC, SC) is all worked into the very same stitch, which is what pushes that single point outward into one of the star’s five spikes.

Fasten off one star. For the second star, fasten off leaving a long tail for sewing, since this one becomes your visible, attached star charm.

Crocheting the Drawstrings (Make 2)

Using white yarn, chain 45. The finished length of each drawstring is approximately 7 inches (18 cm). If you tend to crochet tightly, you may need to add a few extra chains to reach that same finished length.

Crocheting the Body

Using green yarn, chain 39. Just like the trunk, this first round works around both sides of the foundation chain.

Rnd 1: Start in the fourth chain from the hook (note: the first three chains from the hook count as the first stitch of Round 1). Work a DC INC, then 34 DC, then 5 DC into the last chain. Continue down the other side of the foundation chain: 34 DC, then a DC INC in the final chain — 78 sts.

Rnd 2: (DC INC) x3, 34 DC, (DC INC) x5, 34 DC, (DC INC) x2 — 88 sts. Note: start this round from the third chain of Round 1.

Rnds 3–4: 88 DC — 88 sts, worked over 2 rounds.

Rnd 5: Working in the back loops only: (9 DC, DC2tog) x8 — 80 sts.

Rnds 6–7: Working in the back loops only: 80 DC — 80 sts, worked over 2 rounds.

Rnd 8: Working in the back loops only: (8 DC, DC2tog) x8 — 72 sts.

Rnds 9–10: Working in the back loops only: 72 DC — 72 sts, worked over 2 rounds.

Rnd 11: Working in the back loops only: (7 DC, DC2tog) x8 — 64 sts.

Rnds 12–13: Working in the back loops only: 64 DC — 64 sts, worked over 2 rounds.

Rnd 14: Working in the back loops only: (6 DC, DC2tog) x8 — 56 sts.

Rnds 15–16: Working in the back loops only: 56 DC — 56 sts, worked over 2 rounds.

Change to white yarn.

Rnd 17: Working in the back loops only: (5 SC, SC2tog) x8 — 48 sts.

Rnd 18: Working in the back loops only: (3 CH, SK, SLST) x24. This picot-style round creates the small openwork holes around the bag’s top opening — the same holes your drawstrings will later be threaded through.

Fasten off.

Notice that every round from Round 5 onward is worked in the back loops only. This is deliberate and important: it leaves the front loops of Rounds 7, 11, and 15 completely free and available, which is exactly where your three rings of leaves will be attached in the next section.

Crocheting the Leaves

Note: Pay close attention to the direction you’re working in — the right side of each leaf ring should face outward once everything is assembled.

First Ring of Leaves

Using green yarn, work into the front loops of Round 7 (you’ll have 80 loops available there).

Rnd 1: Attach your green yarn to the first front loop, pull the yarn through, then chain 3 in that same loop. Work a DC INC into the second loop. Then work (DC, DC INC) x39 across the remaining 78 loops — 120 sts.

Rnd 2: (2 DC, DC INC) x40 — 160 sts.

Rnd 3: 160 DC — 160 sts.

Change to white yarn.

Rnd 4: 160 SC — 160 sts.

Fasten off.

Second Ring of Leaves

Using green yarn, work into the front loops of Round 11 (64 loops available).

Rnd 1: Attach your green yarn to the first front loop, pull through, chain 3 in that loop, then work a DC INC into the second loop. Continue with (DC, DC INC) x31 across the remaining 62 loops — 96 sts.

Rnd 2: (2 DC, DC INC) x32 — 128 sts.

Rnd 3: 128 DC — 128 sts.

Change to white yarn.

Rnd 4: 128 SC — 128 sts.

Fasten off.

Third Ring of Leaves

Using green yarn, work into the front loops of Round 15 (56 loops available).

Rnd 1: Attach your green yarn to the first front loop, pull through, chain 3 in that loop, then work a DC INC into the second loop. Continue with (DC, DC INC) x27 across the remaining 54 loops — 84 sts.

Rnd 2: (2 DC, DC INC) x28 — 112 sts.

Rnd 3: 112 DC — 112 sts.

Change to white yarn.

Rnd 4: 112 SC — 112 sts.

Fasten off.

Each of these three leaf rings follows the identical logic: attach into a specific set of front loops, double the stitch count almost immediately through DC INC, hold steady for a round, then finish with a contrasting white edge. That dramatic doubling in Round 1 (and the further increase in Round 2) is what forces each ring to flare outward and ruffle, rather than lying flat against the body.

Crocheting the Shoulder Strap

Using white yarn and red yarn, make one strap of each color. Chain a length 2 inches (5 cm) longer than the finished strap length you actually need — for example, if you need a 100 cm strap, chain to 105 cm. These two chains, once twisted together, become the candy-cane-striped shoulder strap.

Assembling Your Christmas Tree Bag

With every piece complete, it’s time to bring everything together into one finished bag.

Attaching the trunk: Sew the trunk to the center of Round 1 of the body, anchoring it to the very base of the tree shape.

Adding the drawstrings: With the body lying flat, sew one drawstring securely to each end of the opening, attaching it inside Round 17. Thread the other end of each drawstring through the small holes created in Round 18. When you reach the opposite end of the opening, knot the two drawstring ends together to complete the closure.

Attaching the stars: Sew the two stars in place, making sure to thread the drawstrings through the center of the stars as you go, so the star charm sits securely at the top where the drawstrings gather.

Adding the shoulder strap: Sew the two strap colors to the body along the side of Round 12, positioning them 3 stitches apart from each other. Thread one end of each strap through and secure with a knot on the inside of the bag. Once that end is secured, twist the two colored strands together along their full length, then secure the twisted strap to the opposite side of the body.

Final touches: Decorate the body with small craft pompoms, scattering them across the ruffled leaf rings to stand in as ornaments.

Frequently Asked Questions

Why is so much of the body worked in the back loops only? Working in the back loops only, starting from Round 5, deliberately leaves the front loops of Rounds 7, 11, and 15 completely free and untouched. Those exposed front loops are exactly where each ring of leaves gets attached later, so this construction choice is what makes the tiered leaf structure possible in the first place.

What creates the dramatic ruffle in each leaf ring? Each ring roughly triples its stitch count within its first two rounds (through repeated DC INC increases), while the loops it’s attached to along the body stay fixed in number. That surplus of new fabric has nowhere to go but outward and ruffled, which is exactly the effect that makes each leaf ring flare out like a tree branch.

Why does the pattern specify paying attention to the crochet direction for the leaves? Since each leaf ring is worked directly into the front loops of an earlier round, it’s possible to end up with the wrong side of the leaf fabric facing outward if you’re not attentive to which direction you’re working in relative to the body. Keeping the right side facing out ensures the leaf rings look consistent with the rest of the bag once assembled.

How does the drawstring closure actually work mechanically? Each drawstring is sewn securely to one side of the top opening, then threaded through the small chain-3 picot holes created in Round 18, running all the way to the other side of the opening. When both drawstring ends are pulled and knotted together, the openwork holes cinch closed, gathering the top of the bag shut.

Can I substitute a different yarn weight if I don’t have sport weight on hand? You can, though keep in mind this pattern’s finished proportions and stitch counts are calibrated for a fine sport-weight yarn. Substituting a bulkier weight would produce a noticeably larger finished bag and would likely require adjusting your stitch counts to keep the leaf rings and body shape proportional.

Is the trunk stuffed firmly like an amigurumi toy, or just lightly filled? The pattern calls for stuffing the trunk only slightly, just enough to give it some dimension and structure to stand on, rather than packing it densely the way you might stuff a plush toy. Overstuffing could distort its proportions relative to the rest of the bag.

What’s a good way to keep track of which round I’m working into when attaching each leaf ring? Since all three leaf rings attach into front loops from rounds that were worked several rounds earlier (Round 7, Round 11, and Round 15), it helps to count carefully from your trunk-side starting point before attaching your yarn, and to place a stitch marker in the very first loop you work into for each ring, so you have a clear reference point to return to when joining the round.

Ready to Crochet Your Own Tree Bag

There’s something wonderfully satisfying about a project that manages to be a toy, a bag, and a piece of holiday decor all at once. Between the tiered ruffled branches, the golden star topper, and that candy-cane twisted strap, this little tree bag captures the spirit of the season in a way that’s genuinely fun to carry around, gift, or simply display.

Grab your hook, and let’s start building your own little Christmas tree.

Leave a Reply

Your email address will not be published. Required fields are marked *